Consentus

Public Forum => RuneScape News => RuneScape News [Old] => Topic started by: Mini Nub on June 14, 2016, 21:28:43

Title: TL;DW 196 - Q&A + Mining and Smithing Rework Concept
Post by: Mini Nub on June 14, 2016, 21:28:43
Watch the stream here (https://www.twitch.tv/runescape/v/72394991)

Update Planning Announcement

Skilling Pets

Mining and Smithing Rework Concept
"Stuff contained in these slides is very early draft and *is not final*. Stuff will most likely change as time goes on."

General Information

Mining/Smithing Rework Slides

Existing Game-play

Mining Rework Concept
The slides will cover most of the information, but I'll expand on some of it down-below.

General Information

Ore Levels

Ore        New Level       
Iron        10       
Coal        20       
Mithril        30       
Adamant        40       
Runite        50       
Orikalk (Dragon) Ore        60       
Necrite (Barrows) ore        70       
Invictum Ore        80       
Aetherium Ore        90       

(http://i.imgur.com/aoFeukM.jpg)

Core Mining Changes

Pickaxes

Mining Shafts

Smithing Rework Concept
The slides will cover most of the information, but I'll expand on some of it down-below.

Item Tiers

Standard Smithing

Masterwork Smithing

Credit to /u/ImRubic (https://www.reddit.com/user/ImRubic) for posting this (https://www.reddit.com/r/runescape/comments/4o36im/tldw_196_qa_mining_and_smithing_rework_concept/) on the /r/Runescape (https://www.reddit.com/r/runescape/) Reddit
Title: Re: TL;DW 196 - Q&A + Mining and Smithing Rework Concept
Post by: Xandak Rune on June 14, 2016, 21:34:43
Much simpler to understand than what I posted xD Woot, the hype is real
Title: Re: TL;DW 196 - Q&A + Mining and Smithing Rework Concept
Post by: Kniight Lost on June 14, 2016, 22:00:26
So much complexity....

At least I have until September to get 120 but now all prices are dropping because people are stupid and think that the update will happen tomorrow and people panic over anything....
Title: Re: TL;DW 196 - Q&A + Mining and Smithing Rework Concept
Post by: Xandak Rune on June 14, 2016, 22:13:14
So much complexity....

At least I have until September to get 120 but now all prices are dropping because people are stupid and think that the update will happen tomorrow and people panic over anything....

Yeah watching people panic at Port Forges lmfao, I'm going for 120 by then too!
Title: Re: TL;DW 196 - Q&A + Mining and Smithing Rework Concept
Post by: Cle on June 14, 2016, 22:42:19
Wow i'm sad that Mining and Smithing Rework isn't incorporating 120 skill sets :/ 
Title: Re: TL;DW 196 - Q&A + Mining and Smithing Rework Concept
Post by: Xandak Rune on June 14, 2016, 22:48:21
Wow i'm sad that Mining and Smithing Rework isn't incorporating 120 skill sets :/

Good point, but I assume that'd require 120 in the various combats as Smithing is used to create armour and weapons
Title: Re: TL;DW 196 - Q&A + Mining and Smithing Rework Concept
Post by: Mini Nub on June 15, 2016, 00:49:12
So much complexity....

At least I have until September to get 120 but now all prices are dropping because people are stupid and think that the update will happen tomorrow and people panic over anything....

Yeah watching people panic at Port Forges lmfao, I'm going for 120 by then too!

Good luck to the both of you on 120 Smithing, an amazing cape, but I'm too lazy to get it :P Share some tips?

Wow i'm sad that Mining and Smithing Rework isn't incorporating 120 skill sets :/ 
Same here! I really wanted it to be a comp requirement to annoy the compers haha, but I bet in the future, 120's will become a thing - They have to IMO to avoid dead content.

Lovely art of the armours
(http://i.imgur.com/aoFeukM.jpg)
Title: Re: TL;DW 196 - Q&A + Mining and Smithing Rework Concept
Post by: Xandak Rune on June 15, 2016, 03:14:19
So much complexity....

At least I have until September to get 120 but now all prices are dropping because people are stupid and think that the update will happen tomorrow and people panic over anything....

Yeah watching people panic at Port Forges lmfao, I'm going for 120 by then too!

Good luck to the both of you on 120 Smithing, an amazing cape, but I'm too lazy to get it :P Share some tips?

Wow i'm sad that Mining and Smithing Rework isn't incorporating 120 skill sets :/ 
Same here! I really wanted it to be a comp requirement to annoy the compers haha, but I bet in the future, 120's will become a thing - They have to IMO to avoid dead content.

Lovely art of the armours
(http://i.imgur.com/aoFeukM.jpg)

Tips for doing Smithing: PROFIT PROFIT PROFIT! 99-120 can and most likely will net a total profit of over 1b if you do it right :P
Profitable items: Rune Platelegs/skirts, Rune 2Hs
Get the Wasteless Smithing scroll from Dungeoneering, work at a Portable Forge, and use Crystal Hammers, to make over 100 extra items per 1k of them, then, High Alch them for massive profit! I dunno how much profit exactly it is except that if you make the bars from the ores themselves, a very slow and painful process (1k bars an hour, at best) then you net 20m+ profit every 10k bars made, turning those into Rune 2Hs/legs then Alching them will be even more than that!


Holy fucking shit those armours o.o Unless they do something to Crafting to match Ranged and Magic, you think it'll go back to Meleescape for those with Smithing? Cause Daaaaaaayum
Title: Re: TL;DW 196 - Q&A + Mining and Smithing Rework Concept
Post by: Charms on June 15, 2016, 08:47:44
Panic get 120 smithing while its profitable !
Title: Re: TL;DW 196 - Q&A + Mining and Smithing Rework Concept
Post by: Kniight Lost on June 15, 2016, 11:00:43
So much complexity....

At least I have until September to get 120 but now all prices are dropping because people are stupid and think that the update will happen tomorrow and people panic over anything....

Yeah watching people panic at Port Forges lmfao, I'm going for 120 by then too!

Good luck to the both of you on 120 Smithing, an amazing cape, but I'm too lazy to get it :P Share some tips?


Tips:

After 99 make rune 2h/platelegs/skirts. Use forges, dg scroll and crystal hammer to profit. If you don't want to get your own portables use portables fc. There is nothing to it. Use yak and presets. Buy and sell everything on ge, just put an offer and let it buy/sell, might not be instant but they usually sell mid price. You usually use 3k bars/hour with yak.
Title: Re: TL;DW 196 - Q&A + Mining and Smithing Rework Concept
Post by: Xandak Rune on June 15, 2016, 11:52:40
Speaking of profits, Runite is down to 9k and Coal is at 190, mass smith bars while it's MASSIVE profit! :D
Title: Re: TL;DW 196 - Q&A + Mining and Smithing Rework Concept
Post by: Xandak Rune on June 15, 2016, 11:55:21
So much complexity....

At least I have until September to get 120 but now all prices are dropping because people are stupid and think that the update will happen tomorrow and people panic over anything....

Yeah watching people panic at Port Forges lmfao, I'm going for 120 by then too!

Good luck to the both of you on 120 Smithing, an amazing cape, but I'm too lazy to get it :P Share some tips?


Tips:

After 99 make rune 2h/platelegs/skirts. Use forges, dg scroll and crystal hammer to profit. If you don't want to get your own portables use portables fc. There is nothing to it. Use yak and presets. Buy and sell everything on ge, just put an offer and let it buy/sell, might not be instant but they usually sell mid price. You usually use 3k bars/hour with yak.

RIP Me, making 3k bars from ore is 3 hours, then after the hour of Smithing 2H's, another hour or more of High Alch-ing them all ;-; Takes like 5 hours just to make and alch 1k Rune 2Hs from ores, rip

Note: I make the bars from ore cause it boosts the profit up a shit ton
Title: Re: TL;DW 196 - Q&A + Mining and Smithing Rework Concept
Post by: Kniight Lost on June 15, 2016, 13:58:25
So much complexity....

At least I have until September to get 120 but now all prices are dropping because people are stupid and think that the update will happen tomorrow and people panic over anything....

Yeah watching people panic at Port Forges lmfao, I'm going for 120 by then too!

Good luck to the both of you on 120 Smithing, an amazing cape, but I'm too lazy to get it :P Share some tips?


Tips:

After 99 make rune 2h/platelegs/skirts. Use forges, dg scroll and crystal hammer to profit. If you don't want to get your own portables use portables fc. There is nothing to it. Use yak and presets. Buy and sell everything on ge, just put an offer and let it buy/sell, might not be instant but they usually sell mid price. You usually use 3k bars/hour with yak.

RIP Me, making 3k bars from ore is 3 hours, then after the hour of Smithing 2H's, another hour or more of High Alch-ing them all ;-; Takes like 5 hours just to make and alch 1k Rune 2Hs from ores, rip

Note: I make the bars from ore cause it boosts the profit up a shit ton

The boost in profit is not really worth it. You have so many ways to make faster money. You need 3 hours to make the 3k bars needed for 1 hour of smithing than 1 hour to alch everything, really not worth it...
Title: Re: TL;DW 196 - Q&A + Mining and Smithing Rework Concept
Post by: Xandak Rune on June 15, 2016, 14:09:20
*shrugs* It's a decent boost but yeah, takes a ton longer, guess I'm just skeptical about buying the bars outright lol

Edit: I'll try  buying bars outright when I finish this batch :p Would make plenty money either way I suppose, you use a BoB?
Title: Re: TL;DW 196 - Q&A + Mining and Smithing Rework Concept
Post by: Kniight Lost on June 15, 2016, 14:34:11
*shrugs* It's a decent boost but yeah, takes a ton longer, guess I'm just skeptical about buying the bars outright lol

Edit: I'll try  buying bars outright when I finish this batch :p Would make plenty money either way I suppose, you use a BoB?

Yes I use bob (pack yak). Also don't buy all bars before-hand (unless you are super rich and don't mind having 1b+ on bars) just buy as you go. Usually things sell quickly at ge at mid price.
Title: Re: TL;DW 196 - Q&A + Mining and Smithing Rework Concept
Post by: Xandak Rune on June 15, 2016, 14:48:37
*shrugs* It's a decent boost but yeah, takes a ton longer, guess I'm just skeptical about buying the bars outright lol

Edit: I'll try  buying bars outright when I finish this batch :p Would make plenty money either way I suppose, you use a BoB?

Yes I use bob (pack yak). Also don't buy all bars before-hand (unless you are super rich and don't mind having 1b+ on bars) just buy as you go. Usually things sell quickly at ge at mid price.

I'd probably still Alch them since Alching is actually pretty quick and can do it before bed or something,
Well, all I have is a War Tort, does it speed it up by much for the extra effort of more than just a preset?
and yeah I buy as I go too xD
Title: Re: TL;DW 196 - Q&A + Mining and Smithing Rework Concept
Post by: Kniight Lost on June 15, 2016, 14:53:08
*shrugs* It's a decent boost but yeah, takes a ton longer, guess I'm just skeptical about buying the bars outright lol

Edit: I'll try  buying bars outright when I finish this batch :p Would make plenty money either way I suppose, you use a BoB?

Yes I use bob (pack yak). Also don't buy all bars before-hand (unless you are super rich and don't mind having 1b+ on bars) just buy as you go. Usually things sell quickly at ge at mid price.

I'd probably still Alch them since Alching is actually pretty quick and can do it before bed or something,
Well, all I have is a War Tort, does it speed it up by much for the extra effort of more than just a preset?
and yeah I buy as I go too xD

Don't think it is worth because of pouch price, your xp/hr will drop but not by much. With pack yak you can do 19 items instead of the normal 9, you just have more banking to do.
Title: Re: TL;DW 196 - Q&A + Mining and Smithing Rework Concept
Post by: Xandak Rune on June 15, 2016, 14:55:28
Yeah, everything is better with Yak it seems lol I don't have anywhere near the charms required to get there :c
Title: Re: TL;DW 196 - Q&A + Mining and Smithing Rework Concept
Post by: Mini Nub on July 26, 2016, 17:53:20
(http://i.imgur.com/eu7auon.png)
(http://i.imgur.com/zeiCr0e.png)
(http://i.imgur.com/sov80N1.png)
(http://i.imgur.com/bALFz3o.png)
(http://i.imgur.com/rMurlWt.png)
(http://i.imgur.com/1XehBoR.png)
(http://i.imgur.com/OunSDgx.png)
(http://i.imgur.com/kE4AqBk.png)
(http://i.imgur.com/kiCzDIE.png)
(http://i.imgur.com/QUkUYQ7.png)
Title: Re: TL;DW 196 - Q&A + Mining and Smithing Rework Concept
Post by: maraderkholm on July 26, 2016, 20:58:59
TY - I am going to have to look through this - out of curiosity - has anyone compared the mining and smithing to seren stones - is it better or should I just stick with Trahearn?